Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat) › from 2016.11
RM3160E _58 Vehicle Interior _019712 SEAT _0109368 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 71052A 1.INSTALL FRONT SEAT CUSHION SPRING SUB-ASSEMBLY

a.
B461078

Engage the 6 hooks to install the front seat cushion spring sub-assembly to the front seat adjuster assembly.


Hide 71849 2.INSTALL SEAT ADJUSTER COVER CAP

a.
B360981

Install the 2 seat adjuster cover caps.


Hide 82192 3.INSTALL FRONT SEAT WIRE

a.

Connect each connector and engage each clamp to install the front seat wire.


Hide 71538B 4.INSTALL LH SEAT FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)

a.
B360979

Engage the 3 claws and guide to install the LH seat front seat cushion edge protector LH.


Hide 71537C 5.INSTALL LH SEAT FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)

HINT:

Use the same procedure as for the LH side.


Hide 71538A 6.INSTALL RH SEAT FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)

a.
B360980

Engage the 3 claws and guide to install the RH seat front seat cushion edge protector LH.


Hide 71537C 7.INSTALL RH SEAT FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)

HINT:

Use the same procedure as for the LH side.


Hide 71874 8.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

a.
B360978

Engage the clip to install the front seat lower cushion shield LH.


b.

Engage the hook as shown in the illustration.


c.

Install the screw.


Hide 71873 9.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)

HINT:

Use the same procedure as for the LH side.


Hide 85860B 10.INSTALL SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)

a.
B360976

Engage the 2 hooks to install the seat cushion climate control blower assembly.


b.
B360974

Connect the connector.


Hide 85868A 11.INSTALL SEAT CUSHION CLIMATE CONTROL BRACKET (w/ Climate Control Seat System)

a.
B360975

Install the seat cushion climate control bracket to the seat cushion climate control blower assembly with the 2 screws.


Hide 85866 12.INSTALL SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)

a.
B360973

Engage the 2 claws to install the seat cushion climate control duct to the seat cushion climate control blower assembly.


Hide 73905 13.INSTALL FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Front Passenger Side)

Hide 87510L 14.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71072S 15.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a.

w/o Variable Seat Cushion System:

i.
B360971

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




ii.
B362259

Using hog ring pliers, install 5 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.





b.

w/ Variable Seat Cushion System:

i.
B360971

Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




ii.
B360969

Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.





Hide 16.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Driver Side)

a.
B360959

w/o Variable Seat Cushion System:

i.

Engage the 10 hooks to install the separate type front seat cushion cover with pad.



b.

w/ Variable Seat Cushion System:

i.
B360966

Using hog ring pliers, install the separate type front seat cushion cover with pad with 4 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




ii.
B360967

Return the separate type front seat cushion cover with pad to its original position.


iii.
B360963

Engage the 6 hooks.


iv.
B360962

Engage the 4 hooks.


v.
B360961

Engage the 4 hooks.


vi.
B360960C01
0,0 0,0 false
V100144

Fastener


Engage the 2 fasteners.



c.

w/ Seat Heater System:

i.
B360957

Engage the 3 clamps.



Hide 17.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Front Passenger Side)

a.
B360982

Engage the 12 hooks and 2 clips to install the separate type front seat cushion cover with pad.


b.

w/ Seat Heater System:

i.
B361010

Engage the 3 clamps.



c.
B360984

Engage the claw to install the connector.


Hide 8219B 18.INSTALL FRONT SEAT NO. 2 WIRE

a.

Connect each connector and engage each clamp to install the front seat No. 2 wire.


Hide 71759B 19.INSTALL FRONT SEATBACK HOOK

a.

for Driver Side

i.

Install the 2 front seatback hooks to the lumbar support adjuster assembly.



b.

for Front Passenger Side

i.

Install the 2 front seatback hooks to the front seatback spring sub-assembly.



Hide 72760D 20.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)

Hide 71053S 21.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY (for Front Passenger Side)

a.
B461081

Engage the 2 guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly.


b.

Engage the 2 claws.


Hide 71587B 22.INSTALL FRONT SEATBACK EDGE PROTECTOR

a.
B337637

Engage each claw to install the 2 front seatback edge protectors.


Hide 85867A 23.INSTALL SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

a.
B360954

Engage the 4 hooks to install the seatback climate control blower.


b.
B360953

Install the clip.


c.

Connect the connector.


Hide 87510N 25.INSTALL FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71074S 26.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.
B360951

Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




b.
B360949

Using hog ring pliers, install 4 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




Hide 27.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.

Install the separate type front seatback cover with pad.


Hide 71930A 28.INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY

a.
B360941

Engage each claw to install the 2 front seat headrest support assemblies.


b.

w/ Climate Control Seat System:

i.
B360940

Engage the 2 claws to connect the seatback climate control blower to the separate type front seatback pad.



c.
B360939C01
0.313,0.323 1.781,0.323 1.781,0.323 1.781,0.708 true 1.667,0.677 1.667,0.323 true 0.344,1.781 1.635,1.781 1.635,1.781 1.635,1.563 true 0.135,0.24 0.354,0.427 0.219,0.188 10 false *a 0.177,1.708 0.396,1.896 0.219,0.188 10 false *a
*a Bracket


Engage the 3 brackets and install the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:
·

For vehicles with a front seat airbag assembly, the separate type front seatback cover with pad must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

·

Make sure that the strap is not twisted after installing the nut.

·

Install the brackets securely.




d.
B360938

Return the separate type front seatback cover to its original position.


e.
B367767

Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




f.
B360936

Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




g.
B360934

Using hog ring pliers, install 5 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




Hide 29.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.
B360932

Engage the 4 guides to install the separate type front seatback assembly to the separate type front seat cushion assembly.


b.

Install the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

w/ Seat Heater System:

i.
B360931

Engage the clamp.


ii.

Connect the connector.



d.
B360930

Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.


e.
B360929C01
0,0 0,0 false
V100144

Fastener


Engage the fastener to secure the front seat airbag assembly wire harness.


f.
B360942

Engage the clamp.


g.

Connect the connector.


h.
B360928

Engage the 2 hooks.


Hide 84928 30.INSTALL SEAT VARIABLE CUSHION SWITCH (w/ Variable Seat Cushion System)

Hide 84920 31.INSTALL FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)

Hide 84922C 32.INSTALL FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

Hide 84070 33.INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)

Hide 84921A 34.INSTALL RECLINING POWER SEAT SWITCH KNOB

a.
B360923

Engage the 4 claws to install the reclining power seat switch knob.


Hide 84921B 35.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a.
B360921

Engage the 4 claws to install the slide and vertical power seat switch knob.


Hide 71868A 36.INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD

a.
B360919

Engage the clamp.


b.
B360918

Engage the claw and clip to install the front seat inner No. 1 cushion shield.


c.

Install the 2 screws.


d.

w/ Variable Seat Cushion System:

i.
B362217

Engage the hook.



Hide 71812D 37.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)

a.

w/ Variable Seat Cushion System:

i.
B360916

Connect the connector to the variable cushion switch.



b.
B360917

Connect the connector to the front lumbar power seat switch.


c.
B360914

w/o Seat Position Memory System:

i.

Connect the connector to the front power seat switch.



d.
B360915

w/ Seat Position Memory System:

i.

Connect the 2 connectors to the position control ECU and switch assembly.



e.
B360913C01
0,0 0,0 false
V100135

Wire Harness Guide


Install the wire harness to the wire harness guide.


f.

Engage the 2 clamps.


g.
B360912

Engage the 3 claws to close the wire harness cover.


h.
B483592

Engage the guide.


i.
B359009

Engage the claw and 3 guides.


j.
B483591

Engage the guide.


k.
B359012

Engage the 2 claws and clip to install the front seat cushion shield.


l.
B359011

Engage the claw.


Hide 71811D 38.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

a.
B362216

Connect the connector to the front power seat switch.


b.
B362215C01
0,0 0,0 false
V100135

Wire Harness Guide


Install the wire harness to the wire harness guide.


c.

Engage the 2 clamps.


d.
B362214

Engage the 3 claws to close the wire harness cover.


e.
B483704

Engage the guide.


f.
B362213

Engage the claw and 4 guides.


g.
B483705

Engage the guide.


h.
B362220

Engage the 2 claws and clip to install the front seat cushion shield.


i.
B362219

Engage the claw.


Hide 71862 39.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

a.
B359006

Engage the claw and guide to install the front seat inner cushion shield.


b.
B359005

Engage the claw and 3 guides.


Hide 71861 40.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)

a.
B359008

Engage the claw and guide to install the front seat inner cushion shield.


b.
B359007

Engage the claw and 4 guides.


Hide 71074S 41.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System)

a.
B359003

Connect the rubber band of the separate type front seatback cover.


Hide 71074S 42.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System)

a.
B359004

Engage the 2 hooks to connect the 2 rubber bands of the separate type front seatback cover.


Hide 73240 43.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73240 44.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 87501B 45.INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

Hide 89178A 46.INSTALL SEAT POSITION AIRBAG SENSOR (for Driver Side)