1.REMOVE CONSOLE BOX ASSEMBLY
67914
2.REMOVE FRONT DOOR SCUFF PLATE LH
62112A
3.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
4.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH
55436A
5.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
53601
7.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55045
8.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
9.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL WITH AIR CONDITIONING CONTROL ASSEMBLY
55446E
10.REMOVE NO. 2 SWITCH HOLE BASE
58817A
11.REMOVE FRONT NO. 2 CONSOLE BOX INSERT
58816B
12.REMOVE CONSOLE BOX INSERT
67913
13.REMOVE FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62111A
14.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
15.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
55435A
16.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
55607
17.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
18.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
55471A
19.REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
55434F
20.REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL
85530
21.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
|
Protective Tape |
Using a screwdriver, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.
Tape the screwdriver tip before use.
85535B
22.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Disengage the 2 claws and remove the No. 1 power outlet socket cover.
85532
23.REMOVE USB CHARGER SOCKET
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the USB charger socket.