Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM › from 2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0101004 AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM T

LIGHTING (EXT)  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:
·

Initialize the headlight leveling ECU assembly after the vehicle height changes due to replacement of suspension components or after performing operations such as removal and reinstallation or replacement of the rear height control sensor sub-assembly.

·

When the headlight leveling ECU assembly is replaced, initialization is also necessary.



HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Automatic Headlight Beam Level Control System
Symptom Suspected Area Link
Automatic headlight beam level control system does not operate Check DTCs Click here
Check fail-safe function Click here
Headlight leveling ECU power source circuit Click here
Headlight beam level control actuator circuit Click here
Headlight leveling ECU assembly Click here
Initialization cannot be performed Check DTCs Click here
CAN communication system Click here
Headlight leveling ECU assembly Click here
"Headlight System Malfunction Visit Your Dealer" is displayed on the multi-information display (headlight leveling control is normal) Harness or connector -
Headlight leveling ECU assembly Click here
Combination meter assembly Click here