Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › 2016.11–2018.09
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0103404 AUTOMATIC HIGH BEAM SYSTEM U

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


B357834E05
1.083,3.479 1.5,3.75 0.417,0.271 3.594,3.5 4.01,3.771 0.417,0.271 5.917,3.479 6.333,3.75 0.417,0.271 1.417,4.833 1.833,5.104 0.417,0.271 4.042,4.833 4.458,5.104 0.417,0.271 5.563,4.906 5.979,5.177 0.417,0.271 1.385,6.396 1.802,6.667 0.417,0.271 4.844,6.396 5.26,6.667 0.417,0.271 6.438,4.906 6.854,5.177 0.417,0.271 3.417,7.958 3.833,8.229 0.417,0.271 2.167,1.083 2.583,1.083 false 2.167,1.583 2.583,1.583 false 2.167,2.083 2.583,2.083 false 4.583,0.552 4.583,0.198 4.583,0.198 4.75,0.198 false 0.552,1.052 0.833,1.219 0.281,0.167 10 false 4H 0.552,1.823 0.833,1.99 0.281,0.167 10 false 4F 0.563,2.25 0.844,2.417 0.281,0.167 10 false 4K 0.833,2.521 1.115,2.688 0.281,0.167 10 false 4L 2.646,1.01 3.104,1.26 0.458,0.25 10 false F20 2.656,1.51 3.104,1.771 0.448,0.26 10 false F19 2.656,2.01 3.094,2.24 0.438,0.229 10 false F18 4.813,0.125 5.156,0.344 0.344,0.219 10 false MB 6.458,0.927 6.823,1.094 0.365,0.167 10 false 4D 6.458,1.75 6.823,1.917 0.365,0.167 10 false 4A 1.177,3.531 1.458,3.698 0.281,0.167 10 false F18 3.688,3.563 4.219,3.823 0.531,0.26 10 false F19 6.021,3.542 6.479,3.781 0.458,0.24 10 false F20 1.531,4.896 1.813,5.063 0.281,0.167 10 false 4H 4.177,4.896 4.458,5.063 0.281,0.167 10 false 4F 5.688,4.979 5.969,5.146 0.281,0.167 10 false 4K 3.521,8.021 3.885,8.25 0.365,0.229 10 false MB 1.521,6.458 1.802,6.625 0.281,0.167 10 false 4D 4.969,6.458 5.25,6.625 0.281,0.167 10 false 4A 6.573,4.969 6.854,5.135 0.281,0.167 10 false 4L

a.

Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


b.

Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
4D-11 - Body ground LA - Body ground Ground Always Below 1 Ω
4D-23 - Body ground BE - Body ground Battery power supply Always 11 to 14 V
4K-1 - Body ground B - Body ground Battery power supply Always 11 to 14 V


c.

Connect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F18-23 (AHBI) - Body ground LG - Body ground Auto high beam switch signal input Auto high beam switch on Below 1 V
Auto high beam switch off 11 to 14 V or Pulse generation
F18-24 (DIM) - Body ground BE - Body ground High beam headlight drive output Dimmer switch in high or high flash position Below 1 V
Dimmer switch in low position 11 to 14 V
F19-8 (A) - Body ground B - Body ground Light control switch AUTO position signal input Light control switch in AUTO position Below 1 V
Ignition switch off, light control switch not in AUTO position 11 to 14 V or Pulse generation
F19-12 (HEAD) - Body ground W - Body ground Light control switch head position input Light control switch in head position Below 1 V
Ignition switch off, light control switch not in head position 11 to 14 V or Pulse generation
F19-19 (CLTB) - F19-21 (CLTE) L - G Automatic light control sensor power supply output Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
F19-20 (CLTS) - Body ground R - Body ground Automatic light control sensor signal input Ignition switch off Below 1 V
Ignition switch ON, light control switch in AUTO position Communication waveform generation
(See waveform 1)
F19-24 (HU) - Body ground Y - Body ground Dimmer switch high position signal input Dimmer switch in high position Below 1 V
Dimmer switch not in high position 11 to 14 V or Pulse generation

i.
E276298N01
2.844,1.646 3.219,1.813 0.375,0.167 10 false GND

Waveform 1

Item Content
Tester Connection F19-20 (CLTS) - Body ground
Tool setting 2 V/DIV., 10 ms./DIV.
Vehicle condition Ignition switch ON, light control switch in AUTO position

HINT:

The communication waveform changes according to the surrounding brightness.