Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AIR COOLED OIL COOLER › from 2016.11
RM3160E _52 Drivetrain _060164 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0298226 AIR COOLED OIL COOLER A

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  AIR COOLED OIL COOLER  INSTALLATION  


PROCEDURE

Hide 32913 1.INSTALL OIL COOLER BRACKET

HINT:

Perform this procedure only when replacement of the oil cooler bracket is necessary.


a.
C364000C01
1.438,0.99 1.656,1.177 0.219,0.188 10 true *a 2.438,0.271 2.656,0.469 0.219,0.198 10 true *b
*a Bolt
*b Nut


Install the oil cooler bracket to the vehicle body with the bolt and nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:

Tightening order: Temporarily tighten bolt → Fully tighten nut → Fully tighten bolt



Hide 32910 2.INSTALL OIL COOLER ASSEMBLY

a.

Install the oil cooler assembly to the oil cooler bracket with the 2 nuts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 3.CONNECT OIL COOLER HOSE

a.
C364001C01
0.844,4.125 0.844,3.531 true 2.74,0.927 2.969,1.104 0.229,0.177 10 true *1 1.333,1.521 1.531,1.719 0.198,0.198 10 true *2 2.802,2.656 3.115,2.813 0.313,0.156 10 false *a 2.781,4 3.094,4.156 0.313,0.156 10 false *b 0.781,4.135 1.094,4.292 0.313,0.156 10 false *c 1.281,3.281 1.594,3.438 0.313,0.156 10 false *d 1.469,3.042 1.781,3.198 0.313,0.156 10 false *e 1.281,3.573 1.594,3.729 0.313,0.156 10 false *d 1.479,3.813 1.792,3.969 0.313,0.156 10 false *e
*1 Outlet No. 2 Oil Cooler Hose
*2 No. 2 Transmission Oil Cooler Hose
*a 0 to 3 mm (0 to 0.118 in.)
*b 2 to 7 mm (0.0787 to 0.276 in.)
*c Paint Mark (Lower Side of Vehicle)
*d 30° (Paint Mark Location)
*e 45° (Claw of Clip Location)


Connect the outlet No. 2 oil cooler hose and No. 2 transmission oil cooler hose to the oil cooler assembly and slide the 2 clips to secure them.

NOTICE:
·

Make sure to slide the outlet No. 2 oil cooler hose and No. 2 transmission oil cooler hose until each contacts the hose stopper of the oil cooler assembly.

·

Make sure that each paint mark and the claws of each clip are within the location shown in the illustration.




Hide 32917 4.INSTALL TRANSMISSION OIL COOLER AIR DUCT

a.
C364002C01
2.51,2.979 2.313,2.979 2.313,2.979 2.24,2.792 true 2.552,2.875 2.75,3.073 0.198,0.198 10 true *a
*a Guide


Engage the guide to temporarily install the transmission oil cooler air duct to the oil cooler assembly.


b.

Install the transmission oil cooler air duct to the oil cooler assembly with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Return the front fender liner LH to its original position.


d.

Install the front fender liner LH with the bolt.


Hide 6.INSPECT FOR OIL LEAK

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER