Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0298312 PANORAMIC VIEW MONITOR SYSTEM C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  C1686  Driver Side Camera Video Sync Signal Malfunction  


DESCRIPTION

This DTC is stored if the parking assist ECU judges as a result of its self check that a synchronization problem is occurring in the image signal sent from the driver side television camera assembly to the parking assist ECU.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1686 Driver Side Camera Video Sync Signal Malfunction Side camera feedback malfunction
·

Harness or connector

·

Parking assist ECU

·

Side television camera assembly LH (for LHD)

·

Outer rear view mirror assembly LH (for LHD)

·

Side television camera assembly RH (for RHD)

·

Outer rear view mirror assembly RH (for RHD)



WIRING DIAGRAM

for LHD


E288341E10
5.656,1.125 6.271,1.323 0.615,0.198 10 false LCB+ 5.667,1.531 6.281,1.729 0.615,0.198 10 false LCV+ 5.667,1.917 6.281,2.115 0.615,0.198 10 false LCV- 5.667,2.333 6.281,2.531 0.615,0.198 10 false LGND 5.667,2.719 6.281,2.917 0.615,0.198 10 false GND1 5.229,1.115 5.844,1.313 0.615,0.198 10 false F130 5.229,2.688 5.875,2.948 0.646,0.26 10 false F131 5.292,0.948 5.906,1.146 0.615,0.198 10 false 12 5.292,1.333 5.906,1.531 0.615,0.198 10 false 10 5.292,1.729 5.906,1.927 0.615,0.198 10 false 11 5.292,2.115 5.906,2.313 0.615,0.198 10 false 24 5.333,2.521 5.948,2.719 0.615,0.198 10 false 3 3.865,1.042 4.479,1.24 0.615,0.198 10 false 3 2.74,2.625 3.354,2.823 0.615,0.198 10 false I17 3.844,1.823 4.458,2.021 0.615,0.198 10 false 4 3.865,1.385 4.479,1.583 0.615,0.198 10 false 5 3.844,2.219 4.458,2.417 0.615,0.198 10 false 2 3.375,1.146 3.99,1.344 0.615,0.198 10 false LCB+ 3.385,1.521 4,1.719 0.615,0.198 10 false LCV+ 3.406,1.885 4.021,2.083 0.615,0.198 10 false LCV- 3.344,2.313 3.958,2.51 0.615,0.198 10 false LGND 0.292,2.646 1.781,3.167 1.49,0.521 10 false Side Television Camera Assembly LH 2.729,2.781 4.198,3.26 1.469,0.479 10 false Outer Rear View Mirror Assembly LH 5.5,3.073 6.813,3.302 1.313,0.229 10 false Parking Assist ECU 4.656,2.083 5.094,2.406 0.438,0.323 10 false * 2.115,2.073 2.552,2.396 0.438,0.323 10 false * 4.25,3.375 5.146,3.667 0.896,0.292 10 false *: Shielded 5.219,1.5 5.833,1.698 0.615,0.198 10 false F130 5.229,1.896 5.844,2.094 0.615,0.198 10 false F130 5.229,2.313 5.844,2.51 0.615,0.198 10 false F130


for RHD



E288341E09
5.656,1.125 6.271,1.323 0.615,0.198 10 false RCB+ 5.667,1.531 6.281,1.729 0.615,0.198 10 false RCV+ 5.667,1.927 6.281,2.125 0.615,0.198 10 false RCV- 5.667,2.333 6.281,2.531 0.615,0.198 10 false RGND 5.667,2.719 6.281,2.917 0.615,0.198 10 false GND1 5.219,1.115 5.833,1.313 0.615,0.198 10 false F130 5.219,2.698 5.865,2.958 0.646,0.26 10 false F131 5.292,0.948 5.906,1.146 0.615,0.198 10 false 6 5.292,1.333 5.906,1.531 0.615,0.198 10 false 4 5.292,1.729 5.906,1.927 0.615,0.198 10 false 5 5.292,2.115 5.906,2.313 0.615,0.198 10 false 18 5.333,2.521 5.948,2.719 0.615,0.198 10 false 3 3.844,1.042 4.458,1.24 0.615,0.198 10 false 3 2.74,2.625 3.354,2.823 0.615,0.198 10 false H18 3.844,1.823 4.458,2.021 0.615,0.198 10 false 4 3.865,1.385 4.479,1.583 0.615,0.198 10 false 5 3.844,2.219 4.458,2.417 0.615,0.198 10 false 2 3.375,1.146 3.99,1.344 0.615,0.198 10 false RCB+ 3.385,1.521 4,1.719 0.615,0.198 10 false RCV+ 3.406,1.885 4.021,2.083 0.615,0.198 10 false RCV- 3.344,2.313 3.958,2.51 0.615,0.198 10 false RGND 0.292,2.646 1.781,3.167 1.49,0.521 10 false Side Television Camera Assembly RH 2.729,2.781 4.198,3.26 1.469,0.479 10 false Outer Rear View Mirror Assembly RH 5.5,3.073 6.813,3.302 1.313,0.229 10 false Parking Assist ECU 4.656,2.083 5.094,2.406 0.438,0.323 10 false * 2.115,2.073 2.552,2.396 0.438,0.323 10 false * 4.25,3.375 5.146,3.667 0.896,0.292 10 false *: Shielded 5.208,1.51 5.823,1.708 0.615,0.198 10 false F130 5.229,1.917 5.844,2.115 0.615,0.198 10 false F130 5.229,2.313 5.844,2.51 0.615,0.198 10 false F130

CAUTION / NOTICE / HINT

NOTICE:
·

When "!" mark is displayed on the multi-display after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>INITIALIZATION

·

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION



PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Clear DTCs
50002 353

b.

Check for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Trouble Codes
50001 353
OK:

DTC C1686 is not output.



Result:
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

B

2.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY LH)

C

8.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY RH)
2.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY LH)
a.

Disconnect the F130 parking assist ECU connector.


b.

Disconnect the I17 outer rear view mirror assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F130-12 (LCB+) - I17-3 (LCB+) Always Below 1 Ω
F130-10 (LCV+) - I17-5 (LCV+) Always Below 1 Ω
F130-11 (LCV-) - I17-4 (LCV-) Always Below 1 Ω
F130-24 (LGND) - I17-2 (LGND) Always Below 1 Ω
F130-12 (LCB+) or I17-3 (LCB+) - Body ground Always 10 kΩ or higher
F130-10 (LCV+) or I17-5 (LCV+) - Body ground Always 10 kΩ or higher
F130-11 (LCV-) or I17-4 (LCV-) - Body ground Always 10 kΩ or higher
F130-24 (LGND) or I17-2 (LGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK PARKING ASSIST ECU (LCV-, LGND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK PARKING ASSIST ECU (LCV-, LGND)
a.

Disconnect the F130 parking assist ECU connector.


b.
E181084C20
1.938,2.021 2.156,2.833 true 1.813,2.135 1.563,2.938 true 0.167,0.167 0.417,0.333 0.25,0.167 10 false *a 1.396,2.969 1.813,3.135 0.417,0.167 10 false LGND 2.094,2.875 2.552,3.042 0.458,0.167 10 false LCV-
*a Component without harness connected
(Parking Assist ECU)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
24 (LGND) - Body ground Always Below 1 Ω
11 (LCV-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

4.CHECK PARKING ASSIST ECU (LCB+, LGND)

NG

4.CHECK PARKING ASSIST ECU (LCB+, LGND)
a.
E272332C83
1.521,0.167 1.917,0.396 0.396,0.229 2.344,1.969 2.177,1.969 2.177,1.969 1.865,1.385 true 2.458,0.365 2.292,0.365 2.292,0.365 1.865,1.188 true 0.146,0.115 0.458,0.271 0.313,0.156 10 false *a 1.563,0.188 2.021,0.385 0.458,0.198 10 false F130 2.406,1.885 3.021,2.083 0.615,0.198 10 false LGND 2.521,0.271 3.135,0.469 0.615,0.198 10 false LCB+
*a Component with harness connected
(Parking Assist ECU)


Remove the parking assist ECU with the connector still connected.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F130-24 (LGND) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
F130-12 (LCB+) - F130-24 (LGND) Ignition switch ACC 5.5 to 7.05 V



Result:
Proceed to
OK
NG



OK

5.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH (LCV+, LGND)

NG

5.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH (LCV+, LGND)
a.

Remove the parking assist ECU with the connector still connected.


b.

Using an oscilloscope, check the waveform of the side television camera assembly LH.

HINT:

A waterproof connector is used for the side television camera assembly LH. Therefore, inspect the waveform at the parking assist ECU with the connector connected.


E272333C75
1.344,0.365 1.75,0.583 0.406,0.219 1.625,1.635 1.813,2.448 1.813,2.448 1.948,2.448 true 3.458,1.823 3.583,2.417 3.583,2.417 3.667,2.417 false 3.563,1.802 4.167,2.417 4.167,2.417 4.333,2.417 false 5.667,1.698 5.5,2.417 5.5,2.417 5.333,2.417 false 5.792,1.646 6,2.417 6,2.417 6.167,2.417 false 1.823,1.49 2.406,2.198 2.406,2.198 2.542,2.198 true 0.125,0.094 0.438,0.292 0.313,0.198 10 false *a 1.396,0.385 1.854,0.583 0.458,0.198 10 false F130 2.01,2.365 2.469,2.563 0.458,0.198 10 false LGND 2.583,2.104 3.042,2.302 0.458,0.198 10 false LCV+ 2.698,1.281 3.156,1.479 0.458,0.198 10 false GND 4.833,1.281 5.292,1.479 0.458,0.198 10 false GND 3.021,0.406 3.333,0.604 0.313,0.198 10 false *b 5.125,0.406 5.438,0.604 0.313,0.198 10 false *c 3.719,2.354 4.031,2.552 0.313,0.198 10 false *d 5.167,2.344 5.479,2.542 0.313,0.198 10 false *d 4.396,2.344 4.708,2.542 0.313,0.198 10 false *e 6.208,2.333 6.521,2.531 0.313,0.198 10 false *e
*a Component with harness connected
(Parking Assist ECU)
*b Waveform 1 (camera lens not covered, displaying an image)
*c Waveform 2 (camera lens covered, blacking out the screen) *d Synchronization Signal
*e Video Waveform - -


HINT:
·

The video waveform changes according to the image sent by the side television camera assembly LH.

·

The video waveform is constantly output when the ignition switch is ACC.



Measurement Condition
Item Content
Tester Connection F130-10 (LCV+) - F130-24 (LGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch ON, panoramic view monitor switch on

OK:

Waveform is similar to that shown in illustration.



Result:
Proceed to
OK
NG



OK

NG

6.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH
6.CHECK SIDE TELEVISION CAMERA ASSEMBLY LH
a.

Replace the side television camera assembly LH with a new or normally functioning one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TELEVISION CAMERA(for Side)>REMOVAL


Result:
Proceed to
NEXT



NEXT

7.CHECK FOR DTC
7.CHECK FOR DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Clear DTCs
50002 353

b.

Check for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Trouble Codes
50001 353
OK:

DTC C1686 is not output.



Result:
Proceed to
OK
NG



OK

END (SIDE TELEVISION CAMERA ASSEMBLY LH IS DEFECTIVE)

NG

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

8.CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY RH)
a.

Disconnect the F130 parking assist ECU connector.


b.

Disconnect the H18 outer rear view mirror assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F130-6 (RCB+) - H18-3 (RCB+) Always Below 1 Ω
F130-4 (RCV+) - H18-5 (RCV+) Always Below 1 Ω
F130-5 (RCV-) - H18-4 (RCV-) Always Below 1 Ω
F130-18 (RGND) - H18-2 (RGND) Always Below 1 Ω
F130-6 (RCB+) or H18-3 (RCB+) - Body ground Always 10 kΩ or higher
F130-4 (RCV+) or H18-5 (RCV+) - Body ground Always 10 kΩ or higher
F130-5 (RCV-) or H18-4 (RCV-) - Body ground Always 10 kΩ or higher
F130-18 (RGND) or H18-2 (RGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

9.CHECK PARKING ASSIST ECU (RCV-, RGND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.CHECK PARKING ASSIST ECU (RCV-, RGND)
a.

Disconnect the F130 parking assist ECU connector.


b.
E181084C21
0.896,1.688 1.167,1.198 true 0.74,2 0.49,2.667 true 0.167,0.167 0.417,0.333 0.25,0.167 10 false *a 0.344,2.75 0.76,2.917 0.417,0.167 10 false RGND 1.177,1.073 1.635,1.24 0.458,0.167 10 false RCV-
*a Component without harness connected
(Parking Assist ECU)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
18 (RGND) - Body ground Always Below 1 Ω
5 (RCV-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

10.CHECK PARKING ASSIST ECU (RCB+, RGND)

NG

10.CHECK PARKING ASSIST ECU (RCB+, RGND)
a.
E272332C82
1.521,0.146 1.906,0.375 0.385,0.229 0.5,0.5 0.667,0.5 0.667,0.5 0.833,1.073 true 1.073,2.01 0.906,2.01 0.906,2.01 0.844,1.26 true 0.083,0.073 0.396,0.229 0.313,0.156 10 false *a 1.573,0.167 2.031,0.365 0.458,0.198 10 false F130 1.125,1.917 1.74,2.115 0.615,0.198 10 false RGND 0.094,0.406 0.708,0.604 0.615,0.198 10 false RCB+
*a Component with harness connected
(Parking Assist ECU)


Remove the parking assist ECU with the connector still connected.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F130-18 (RGND) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
F130-6 (RCB+) - F130-18 (RGND) Ignition switch ACC 5.5 to 7.05 V



Result:
Proceed to
OK
NG



OK

11.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH (RCV+, RGND)

NG

11.CHECK SIDE TELEVISION CAMERA ASSEMBLY RH (RCV+, RGND)
a.

Remove the parking assist ECU with the connector still connected.


b.

Using an oscilloscope, check the waveform of the side television camera assembly RH.

HINT:

A waterproof connector is used for the side television camera assembly RH. Therefore, inspect the waveform at the parking assist ECU with the connector connected.


E272333C74
1.323,0.344 1.698,0.594 0.375,0.25 0.531,2.417 0.656,2.417 0.656,2.417 0.771,1.5 true 1.219,2.417 1.083,2.417 1.083,2.417 0.958,1.365 true 3.083,2.406 3.25,2.406 3.25,2.406 3.448,1.823 true 5.302,2.271 5.469,2.271 5.469,2.271 5.667,1.688 true 3.813,2.521 3.646,2.521 3.646,2.521 3.563,1.781 true 6.031,2.375 5.865,2.375 5.865,2.375 5.781,1.635 true 0.125,0.083 0.438,0.24 0.313,0.156 10 false *a 2.927,0.385 3.24,0.542 0.313,0.156 10 false *b 5.125,0.385 5.438,0.542 0.313,0.156 10 false *c 2.927,2.323 3.271,2.531 0.344,0.208 10 false *d 3.854,2.448 4.167,2.604 0.313,0.156 10 false *e 1.365,0.375 1.823,0.573 0.458,0.198 10 false F130 2.729,1.292 3.188,1.49 0.458,0.198 10 false GND 4.885,1.292 5.344,1.49 0.458,0.198 10 false GND 0.094,2.344 0.708,2.542 0.615,0.198 10 false RGND 1.281,2.333 1.896,2.531 0.615,0.198 10 false RCV+ 5.146,2.188 5.49,2.396 0.344,0.208 10 false *d 6.063,2.302 6.375,2.458 0.313,0.156 10 false *e
*a Component with harness connected
(Parking Assist ECU)
*b Waveform 1 (camera lens not covered, displaying an image)
*c Waveform 2 (camera lens covered, blacking out the screen) *d Synchronization Signal
*e Video Waveform - -


HINT:
·

The video waveform changes according to the image sent by the side television camera assembly RH.

·

The video waveform is constantly output when the ignition switch is ACC.



Measurement Condition
Item Content
Tester Connection F130-4 (RCV+) - F130-18 (RGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch ON, panoramic view monitor switch on

OK:

Waveform is similar to that shown in illustration.



Result:
Proceed to
OK
NG



OK

NG

12.REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH
12.REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH
a.

Replace the side television camera assembly RH with a new or normally functioning one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TELEVISION CAMERA(for Side)>REMOVAL


Result:
Proceed to
NEXT



NEXT

13.CHECK FOR DTC
13.CHECK FOR DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Clear DTCs
50002 353

b.

Check for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR

Chassis > Panoramic View Monitor > Trouble Codes
50001 353
OK:

DTC C1686 is not output.



Result:
Proceed to
OK
NG



OK

END (SIDE TELEVISION CAMERA ASSEMBLY RH IS DEFECTIVE)

NG

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH