1.REMOVE FRONT BUMPER ASSEMBLY
89341K
2.REMOVE NO. 1 ULTRASONIC SENSOR
Use the same procedure for all No. 1 ultrasonic sensors.
Disconnect the connector.
Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
89347B
3.REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER
Perform this procedure only when replacement of the front corner ultrasonic sensor retainer is necessary.
Use the same procedure for all front corner ultrasonic sensor retainers.
Remove the front corner ultrasonic sensor retainer.