1.REMOVE REAR BUMPER ASSEMBLY
88172
2.REMOVE BLIND SPOT MONITOR SENSOR LH
|
Connector |
|
Bolt |
|
Nut |
Disconnect the connector.
Remove the bolt, 2 nuts and blind spot monitor sensor LH.
Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.
88162
3.REMOVE BLIND SPOT MONITOR SENSOR RH
|
Connector |
|
Bolt |
|
Nut |
Disconnect the connector.
Remove the bolt, 2 nuts and blind spot monitor sensor RH.
Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.