Home › Engine / Hybrid System › 2GR-FKS (COOLING) › COOLING FAN MOTOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060161 2GR-FKS COOLING _0297918 COOLING FAN MOTOR A

2GR-FKS COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363F 1.INSTALL COOLING FAN MOTOR RH

a.

Install the cooling fan motor RH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Connect the cooling fan motor RH connector and engage the wire harness to the clamp.


Hide 16363G 2.INSTALL COOLING FAN MOTOR LH

a.

Install the cooling fan motor LH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Connect the cooling fan motor LH connector and engage the wire harness to the 2 clamps.


Hide 16361J 3.INSTALL FAN RH

NOTICE:

Do not reverse the position of the fan RH and fan LH when installing them. Doing so may damage the parts.


a.

Install the fan RH with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361K 4.INSTALL FAN LH

NOTICE:

Do not reverse the position of the fan RH and fan LH when installing them. Doing so may damage the parts.


a.

Install the fan LH with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 5.INSTALL FAN SHROUD ASSEMBLY

a.

Engage the 3 guides.


b.

Engage the 3 claws to install the fan shroud assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan shroud assembly.



c.

Engage the 4 wire harness clamps.


d.

Connect the cooling fan ECU connector.


Hide 6.CONNECT RADIATOR RESERVE TANK HOSE

a.

Connect the radiator reserve tank hose.


Hide 16571C 7.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose and slide the clip to secure it.


Hide 53205 8.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

Hide 17750A 11.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 51441 15.INSTALL NO. 1 ENGINE UNDER COVER