Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL PRESSURE SENSOR(for High Pressure) › from 2016.11
RM3160E _51 Engine / Hybrid System _060158 2GR-FKS FUEL _0298782 FUEL PRESSURE SENSOR(for High Pressure) A

2GR-FKS FUEL  FUEL PRESSURE SENSOR(for High Pressure)  REMOVAL  


PROCEDURE

Hide 23860 1.REMOVE FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH (FUEL PRESSURE SENSOR)

Click hereEngine / Hybrid System>2GR-FKS FUEL>FUEL INJECTOR(for Direct Injection)>REMOVAL

NOTICE:
·

Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly LH.

·

If the fuel pressure sensor is removed, replace the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) with a new one.



Hide 23809K 2.REMOVE FUEL PIPE PLUG SUB-ASSEMBLY

a.
A368888

Secure the fuel delivery pipe with sensor assembly LH in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe with sensor assembly LH.


c.

Remove the dust cap sub-assembly from the fuel pipe plug sub-assembly.


d.

Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly.


e.

Remove the fuel delivery pipe with sensor assembly LH from the vise.