Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2016.11
RM3160E _51 Engine / Hybrid System _060158 2GR-FKS FUEL _0298787 FUEL SENDER GAUGE ASSEMBLY A

2GR-FKS FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Connect the fuel sender gauge assembly connector.


c.

Engage the clamp to connect the wire harness.

NOTICE:
·

Make sure that the wire harness has a moderate amount of slack.

·

Do not damage the wire harness.




Hide 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY