Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2GR-FKS) › from 2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0296316 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2GR-FKS) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2GR-FKS)  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake actuator assembly) operates the stop light switch assembly (stop light relay) to illuminate the stop lights.

If the ECM receives a stop light switch control relay malfunction signal from the skid control ECU (brake actuator assembly), DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P057113 Brake Switch "A" Circuit Open While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, the ECM detects the stop light switch assembly error signal from the skid control ECU (brake actuator assembly) for approximately 0.2 seconds or more. Pre-collision system

CAUTION / NOTICE / HINT

HINT:

When DTC P057113 is stored by the dynamic radar cruise control system, DTC C1A4B is stored by the pre-collision system. Therefore, if DTC P057113 is stored, inspect the pre-collision system first.


PROCEDURE

1.GO TO PRE-COLLISION SYSTEM

NEXT

END