Home › Engine / Hybrid System › 2GR-FKS FUEL › FUEL PUMP › from 2016.11
RM3160E _51 Engine / Hybrid System _060158 2GR-FKS FUEL _0299120 FUEL PUMP A

2GR-FKS FUEL  FUEL PUMP  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A368838C01
1.865,0.813 2.292,0.813 true 2.344,0.729 2.656,0.885 0.313,0.156 10 false *a
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 83320 1.REMOVE FUEL SENDER GAUGE ASSEMBLY

Hide 77024A 2.REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

a.
A368907

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.


b.

Disconnect the 2 fuel pump harness connectors.


c.
A369125

Using needle nose pliers, remove the E-ring from the fuel suction plate shaft.


d.
A368909C01
2.115,1.948 2.271,2.073 2.271,2.073 2.406,2.073 false 2.448,1.99 2.76,2.146 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the claw and clamp, and disconnect the fuel pump filter hose from the No. 1 fuel sub-tank.

NOTICE:

Do not damage the No. 1 fuel sub-tank.



e.
A368911C01
2.083,0.979 2.615,0.979 true 2.667,0.906 2.979,1.063 0.313,0.156 10 false *a
*a Tube


Disengage the 2 claws and remove the fuel suction plate sub-assembly from the No. 1 fuel sub-tank.

NOTICE:

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>2GR-FKS FUEL>FUEL SYSTEM>PRECAUTION



f.
A368914

Remove the spring from the fuel suction plate shaft.


Hide 23217D 3.REMOVE FUEL PUMP FILTER

a.
A375503C02
2.094,0.75 2.438,0.75 true 2.313,1.844 2.656,1.844 true 0.646,1.917 0.781,1.917 0.781,1.917 0.979,1.688 true 2.479,0.656 2.792,0.813 0.313,0.156 10 false *a 0.479,1.833 0.792,1.99 0.313,0.156 10 false *b 2.708,1.76 3.021,1.917 0.313,0.156 10 false *1
*1 Fuel Pump Filter
*a Fuel Filter
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws, and remove the fuel pump filter from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or fuel pump filter.

·

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>2GR-FKS FUEL>FUEL SYSTEM>PRECAUTION




b.
A363227

Disengage the claw to disconnect the fuel pump harness from the fuel pump filter.

NOTICE:

Do not forcibly pull the fuel pump harness.


HINT:

If it is difficult to disconnect the terminal of the fuel pump harness from the fuel pump filter, push the terminal towards the center of the fuel pump filter while disconnecting it.



Hide 23221 4.REMOVE FUEL PUMP

a.
A363228

Remove the fuel pump from the fuel filter.


b.
A369126

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump.


c.
A363230C02
2.333,0.604 2.448,0.438 2.448,0.438 2.573,0.438 false 2.323,0.76 2.583,0.76 false 0.698,4.292 0.958,4.292 false 2.688,0.344 3,0.5 0.313,0.156 10 false *1 2.635,0.708 2.948,0.865 0.313,0.156 10 false *2 2.104,1.781 2.417,1.938 0.313,0.156 10 false *a 2.146,2.313 2.458,2.469 0.313,0.156 10 false *a 1.01,4.208 1.323,4.365 0.313,0.156 10 false *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.