Home › Drivetrain › MF1A (TRANSFER / 4WD / AWD) › TRANSFER ASSEMBLY › from 2016.11
RM3160E _52 Drivetrain _019685 MF1A TRANSFER / 4WD / AWD _0107526 TRANSFER ASSEMBLY A

MF1A TRANSFER / 4WD / AWD  TRANSFER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 36100 1.INSTALL TRANSFER ASSEMBLY

a.

Install the 4 new transfer and transaxle setting stud bolts to the automatic transaxle case positions shown in the illustration.

C297719C01
1.01,0.396 1.385,0.667 0.375,0.271 10 false A 1.958,0.927 2.333,1.198 0.375,0.271 10 true A 1.354,0.333 1.729,0.604 0.375,0.271 10 false A 1.385,2.521 1.76,2.792 0.375,0.271 10 false B 4.5,1.292 4.813,1.448 0.313,0.156 10 false *a 6.667,1.344 6.979,1.5 0.313,0.156 10 false *b 3.927,0.875 4.24,1.031 0.313,0.156 10 false *c 6.052,1.083 6.365,1.24 0.313,0.156 10 false *c 6.052,1.635 6.365,1.792 0.313,0.156 10 false *c 3.906,1.792 4.219,1.948 0.313,0.156 10 false *c 3.333,0.385 3.708,0.656 0.375,0.271 10 false A 5.458,0.604 5.833,0.875 0.375,0.271 10 false B
*a 69 mm (2.72 in.) *b 49 mm (1.93 in.)
*c 22 mm (0.866 in.) - -


Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)

NOTICE:

Install the sealed side of the transfer and transaxle setting stud bolt to the automatic transaxle assembly.



b.

Install the transfer assembly to the automatic transaxle assembly with the 8 nuts.

Torque:
68.6 N*m (700 kgf*cm, 51 ft.*lbf)

NOTICE:
·

Install the transfer assembly to the automatic transaxle assembly horizontally.

·

Do not touch the transfer assembly oil seals during installation.




Hide 30500 2.INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (When Not Using the Engine Support Bridge)

Hide 30500 3.INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (When Using the Engine Support Bridge)