Home › Engine / Hybrid System › 2GR-FKS LUBRICATION › ENGINE OIL COOLER › from 2016.11
RM3160E _51 Engine / Hybrid System _060162 2GR-FKS LUBRICATION _0299639 ENGINE OIL COOLER A

2GR-FKS LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 17150 3.REMOVE EXHAUST MANIFOLD ASSEMBLY LH

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A368176

Remove the nut and hose clamp from the cylinder block sub-assembly.


b.
A368177C01
1.125,0.302 1.344,0.302 1.344,0.302 1.708,0.698 true 1.948,1.042 2.396,1.396 2.396,1.396 2.688,1.396 true 0.938,0.219 1.135,0.417 0.198,0.198 10 true *1 2.729,1.281 2.917,1.5 0.188,0.219 10 true *2
*1 No. 4 Water By-pass Hose
*2 No. 5 Water By-pass Hose


Slide the 2 clips and disconnect the No. 4 water by-pass hose and No. 5 water by-pass hose from the oil cooler assembly.


c.
A368178

Remove the 2 bolts, 2 nuts and oil cooler assembly from the No. 1 oil cooler bracket.


d.
A368179C01
1.833,0.875 2.375,0.875 true 0.667,1.094 1.271,1.094 true 1.823,1.396 2.208,1.396 2.208,1.396 2.208,0.885 true 2.375,0.771 2.594,0.958 0.219,0.188 10 true *1 0.448,1.021 0.656,1.198 0.208,0.177 10 true *2
*1 O-Ring
*2 No. 1 Cylinder Block Insulator


Remove the 2 O-rings and No. 1 cylinder block insulator from the No. 1 oil cooler bracket.