Home › Engine / Hybrid System › 2GR-FKS LUBRICATION › ENGINE OIL COOLER › from 2016.11
RM3160E _51 Engine / Hybrid System _060162 2GR-FKS LUBRICATION _0299639 ENGINE OIL COOLER A

2GR-FKS LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install the No. 1 cylinder block insulator and 2 new O-rings to the No. 1 oil cooler bracket.


b.

Install the oil cooler assembly to the No. 1 oil cooler bracket with the 2 bolts and 2 nuts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.


d.

Install the hose clamp with the nut to the cylinder block sub-assembly.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 17150 2.INSTALL EXHAUST MANIFOLD ASSEMBLY LH