Home › Engine / Hybrid System › 2GR-FKS EMISSION CONTROL › CANISTER › from 2016.11
RM3160E _51 Engine / Hybrid System _060159 2GR-FKS EMISSION CONTROL _0299802 CANISTER A

2GR-FKS EMISSION CONTROL  CANISTER  INSTALLATION  


PROCEDURE

Hide 77740 1.INSTALL CANISTER (CHARCOAL CANISTER ASSEMBLY)

a.
A371508C01
2.875,1.115 3.031,0.708 3.031,0.708 3.125,0.708 true 0.448,0.969 0.448,0.542 0.448,0.542 0.281,0.542 true 3.135,0.604 3.333,0.813 0.198,0.208 10 true *a 0.115,0.469 0.271,0.635 0.156,0.167 10 true *b
*a Clip
*b Guide


Engage the clip and install the canister (charcoal canister assembly) to the vehicle body and guide with the 3 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the outlet charcoal canister tube sub-assembly to the canister (charcoal canister assembly) and slide the clip to secure it.

HINT:

Engage the clip within the area shown in the illustration.


A351343C01
2.49,1.604 2.875,1.604 true 3.396,1.031 3.677,0.302 3.677,0.302 3.885,0.302 true 2.302,1.49 2.521,1.708 0.219,0.219 10 true *a 3.958,0.208 4.302,0.427 0.344,0.219 10 false *b 1.135,0.542 1.448,0.76 0.313,0.219 10 false *c 5.594,1.563 5.906,1.823 0.313,0.26 10 false *d 6.094,1.281 6.427,1.531 0.333,0.25 10 false *e 5.875,0.292 6.188,0.51 0.313,0.219 10 false *c 0.99,2.333 1.302,2.594 0.313,0.26 10 false *d
*a Charcoal Canister Hose *b Outlet Charcoal Canister Tube Sub-assembly
*c 2 to 7 mm (0.0787 to 0.276 in.) *d 120°
*e Upper - -



c.

Connect the charcoal canister hose to the fuel tube and slide the clip to secure it.

HINT:

Engage the clip within the area shown in the illustration.



d.
A315524C02
2.542,0.521 2.469,0.521 2.469,0.521 2.448,0.719 false 2.135,0.74 2.104,0.583 2.104,0.583 2,0.583 false 2.115,1.156 2.094,1.323 2.094,1.323 1.99,1.323 false 2.594,0.438 2.906,0.594 0.313,0.156 10 false *a 1.833,0.5 2.146,0.656 0.313,0.156 10 false *b 1.833,1.24 2.146,1.396 0.313,0.156 10 false *b
*a Retainer
*b Claw
V100135

Push
V100136

Push in


Push the fuel tank vent hose sub-assembly onto the canister (charcoal canister assembly) and push in the retainer to engage the 2 claws.

NOTICE:
·

Check that there are no scratches or foreign matter around the connecting parts of the fuel tank vent hose sub-assembly and pipe (canister (charcoal canister assembly)) before performing this work.

·

After connecting the fuel tank vent hose sub-assembly, check that the fuel tank vent hose sub-assembly is securely connected by pulling on the tube connector.




Hide 77765 2.INSTALL CHARCOAL CANISTER PROTECTOR

a.

Install the charcoal canister protector with the 3 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 17430 3.INSTALL TAIL EXHAUST PIPE ASSEMBLY