The combination meter assembly communicates with the ECM, brake actuator assembly (skid control ECU), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag sensor assembly, navigation receiver assembly*1, radio and display receiver assembly*2, headlight leveling ECU assembly*4, forward recognition camera*3 and driving support ECU assembly*3 via the CAN communication system.
*1: for Navigation Receiver Type
*2: for Radio and Display Type
*3: w/ Forward Recognition Camera
*4: w/ Automatic Headlight Beam Level Control System
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with ECM continues for 2 seconds or more |
·
ECM ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0129 | Lost Communication with Brake System Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with brake actuator assembly (skid control ECU) continues for 3 seconds or more |
·
Brake actuator assembly (skid control ECU) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0131 | Lost Communication with Power Steering Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with power steering ECU assembly continues for 3 seconds or more |
·
Power steering ECU assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0142 | Lost Communication with Body Control Module "B" | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with main body ECU (multiplex network body ECU) continues for 10 seconds or more |
·
Main body ECU (multiplex network body ECU) ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0151 | Lost Communication with Restraints Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with airbag sensor assembly continues for 10 seconds or more |
·
Airbag sensor assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0163 | Lost Communication with Navigation Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with navigation receiver assembly*1 or radio and display receiver assembly*2 continues for 3 seconds or more |
·
Navigation receiver assembly*1 ·
Radio and display receiver assembly*2 ·
CAN communication system ·
Combination meter assembly |
DTC stored | - |
| U0182 | Lost Communication with Lighting Control Module Front | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with headlight leveling ECU assembly continues for 10 seconds or more |
·
Headlight leveling ECU assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Automatic Headlight Beam Level Control System |
| U023A | Lost Communication with Front Camera Module | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with forward recognition camera continues for 10 seconds or more |
·
Forward recognition camera ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Forward Recognition Camera |
| U1104 | Lost Communication with Driving Support ECU | When IG voltage is 9.5 V or more and the following condition is detected:
·
No communication with driving support ECU assembly continues for 10 seconds or more |
·
Driving support ECU assembly ·
CAN communication system ·
Combination meter assembly |
DTC stored | w/ Forward Recognition Camera |
*1: for Navigation Receiver Type
*2: for Radio and Display Type
Check if CAN communication DTCs are output.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM
| Result | Proceed to |
|---|---|
| CAN communication DTCs are not output | A |
| CAN communication DTCs are output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING