Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303255 ACCELERATOR PEDAL A

2GR-FKS ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Hide 78110K 2.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A315113C01
0.146,0.135 0.448,0.396 0.302,0.26 12 false *A 0.177,2.5 0.469,2.76 0.292,0.26 12 false *B
*A for LHD
*B for RHD


Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:

If the accelerator pedal sensor assembly has been struck or dropped, replace it.