Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303257 CAMSHAFT POSITION SENSOR A

2GR-FKS ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 17190 1.REMOVE INTAKE AIR SURGE TANK ASSEMBLY

Hide 11401Q 2.REMOVE VVT SENSOR (for Intake Side of Bank 1)

a.
A389206

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

NOTICE:

If the VVT sensor has been struck or dropped, replace it.



Hide 11401M 3.REMOVE VVT SENSOR (for Exhaust Side of Bank 1)

a.
A389205

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

NOTICE:

If the VVT sensor has been struck or dropped, replace it.



Hide 11401M 4.REMOVE VVT SENSOR (for Intake Side of Bank 2)

a.
A389203

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

NOTICE:

If the VVT sensor has been struck or dropped, replace it.



Hide 11401M 5.REMOVE VVT SENSOR (for Exhaust Side of Bank 2)

a.
A389204

Disconnect the VVT sensor connector.


b.

Remove the bolt and VVT sensor from the cylinder head cover sub-assembly LH.

NOTICE:

If the VVT sensor has been struck or dropped, replace it.