Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303258 CRANKSHAFT POSITION SENSOR A

2GR-FKS ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 17150 1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (TWC: Front Catalyst)

Hide 19312 2.REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR

a.
A369352

Remove the nut and hose clamp from the crankshaft position sensor protector.


b.
A369395

Remove the 3 bolts and crankshaft position sensor protector from the cylinder block sub-assembly and oil pan sub-assembly.


Hide 11401G 3.REMOVE CRANKSHAFT POSITION SENSOR

a.
A398382

Disconnect the crankshaft position sensor connector.


b.

Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.