Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303260 ENGINE COOLANT TEMPERATURE SENSOR A

2GR-FKS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.

NOTICE:

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.



b.

Install the engine coolant temperature sensor to the water outlet with the clip.

NOTICE:
·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.




c.

Connect the engine coolant temperature sensor connector.


Hide 11209 4.INSTALL V-BANK COVER SUB-ASSEMBLY

Hide 5.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION