Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303260 ENGINE COOLANT TEMPERATURE SENSOR A

2GR-FKS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 11209 1.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 89422 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A369361

Disconnect the engine coolant temperature sensor connector.


b.
A369362

Remove the clip and engine coolant temperature sensor from the water outlet.

NOTICE:

If the engine coolant temperature sensor has been struck or dropped, replace it.