89341K
1.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
for 6 Sensor Type:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Front Side)>REMOVAL
89347B
2.REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
for 6 Sensor Type:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Front Side)>REMOVAL
81220
3.REMOVE FOG LIGHT ASSEMBLY LH
81210A
4.REMOVE FOG LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
81482C
5.REMOVE FOG LIGHT COVER LH
Remove the 4 screws.
Remove the clip.
Disengage the claw to remove the fog light mounting bracket LH.
Remove the screw.
Remove the 2 clips.
Disengage the 5 claws to remove the fog light cover LH.
81481E
6.REMOVE FOG LIGHT COVER RH
Use the same procedure as for the LH side.
53879H
7.REMOVE FRONT FENDER LINER RETAINER
Disengage the claw to remove the front fender liner retainer.
Use the same procedure for the RH side and LH side.
52536
8.REMOVE FRONT BUMPER SIDE RETAINER LH
Remove the screw.
Remove the clip.
Disengage the 3 claws to remove the front bumper side retainer LH.
52535
9.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
86790B
10.REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
52521
11.REMOVE FRONT BUMPER UPPER CENTER RETAINER
Remove the 8 screws and front bumper upper center retainer.
53106D
12.REMOVE RADIATOR GRILLE GARNISH SUB-ASSEMBLY LH
| *a | Hook |
|
Double-sided Tape |
Disengage the 5 claws as shown in the illustration.
Disengage the hook to remove the radiator grille garnish sub-assembly LH.
53105D
13.REMOVE RADIATOR GRILLE GARNISH SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
53102A
14.REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY
Remove the 4 screws.
Disengage the 16 claws to remove the lower radiator grille sub-assembly.
52114A
15.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
Remove the 2 screws.
Disengage the 4 claws to remove the front bumper extension mounting bracket
52129B
16.REMOVE LOWER FRONT BUMPER COVER
| *1 | Outside Moulding Retainer |
Remove the 2 outside moulding retainers.
Remove the 4 clips.
Disengage the 18 claws to remove the lower front bumper cover.
75895K
17.REMOVE NO. 1 MOULDING TAPE
Remove the No. 1 moulding tape.
Use the same procedure for the RH side and LH side.
52611
18.REMOVE FRONT BUMPER ENERGY ABSORBER
Disengage the 2 guides to remove the front bumper energy absorber.
52131A
19.REMOVE FRONT BUMPER REINFORCEMENT
Disengage the 2 clamps.
Remove the 6 bolts and front bumper reinforcement.
52142C
20.REMOVE FRONT BUMPER STAY LH
Remove the bolt.
Using a screwdriver, disengage the clip as shown in the illustration.
Disengage the claw to remove the front bumper stay LH.
52141D
21.REMOVE FRONT BUMPER STAY RH
Use the same procedure as for the LH side.