81490E
1.REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)
Disengage the clamp.
Remove the 2 screws.
Disengage 2 claws to remove the reflex reflector assembly LH.
81480D
2.REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)
Use the same procedure as for the LH side.
81490C
3.REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)
81480A
4.REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)
Use the same procedure as for the LH side.
89342
5.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
for Corner Sensor:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL
89342A
6.REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
for Back Sensor:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR(for Rear Side)>REMOVAL
89348R
7.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
82183
8.REMOVE NO. 3 LUGGAGE ROOM WIRE
w/o Rear Fog Light with TOYOTA Parking Assist-sensor System:
Disengage the 9 clamps to remove the No. 3 luggage room wire.
w/ Rear Fog Light without TOYOTA Parking Assist-sensor System:
Disengage the 9 clamps to remove the No. 3 luggage room wire.
w/ Rear Fog Light and TOYOTA Parking Assist-sensor System:
Disengage the 9 clamps to remove the No. 3 luggage room wire.
52615
9.REMOVE REAR BUMPER ENERGY ABSORBER
Disengage the 7 claws and remove the rear bumper energy absorber.
89348S
10.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
52151G
11.REMOVE REAR BUMPER EXTENSION
Remove the screw.
Remove the 5 clips.
Disengage the 10 claws and 2 guides to remove the rear bumper extension.
52169C
12.REMOVE LOWER REAR BUMPER COVER
Remove the 2 screws.
Remove the 2 clips.
Disengage the 14 claws to remove the lower rear bumper cover.
52724
13.REMOVE REAR BUMPER EXTENSION MOULDING LH (w/ Plated Moulding)
Remove the 2 screws.
Disengage the 2 claws to remove the rear bumper extension moulding LH.
52723
14.REMOVE REAR BUMPER EXTENSION MOULDING RH (w/ Plated Moulding)
Use the same procedure as for the LH side.
52753
15.REMOVE REAR BUMPER SIDE MOULDING LH (w/ Plated Moulding)
Disengage the 4 claws to remove the rear bumper side moulding LH.
52752
16.REMOVE REAR BUMPER SIDE MOULDING RH (w/ Plated Moulding)
Use the same procedure as for the LH side.
75895B
17.REMOVE NO. 2 MOULDING TAPE
Remove the No. 2 moulding tape.
Use the same procedure for the RH side and LH side.
52156A
18.REMOVE REAR BUMPER SIDE SUPPORT LH
Remove the screw.
Using a screwdriver, disengage the 3 clips as shown in the illustration.
Disengage the 2 claws to remove the rear bumper side support LH.
52155A
19.REMOVE REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52592
20.REMOVE REAR BUMPER SIDE SEAL LH
Remove the 4 clips and rear bumper side seal LH.
52591
21.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52171A
22.REMOVE NO. 1 REAR BUMPER REINFORCEMENT
Remove the 6 nuts and No. 1 rear bumper reinforcement.