1.REMOVE REAR BUMPER ASSEMBLY
89342
2.REMOVE NO. 1 ULTRASONIC SENSOR (for Corner Sensor)
Use the same procedure for the RH side and LH side.
Disconnect the connector.
Disengage the 2 claws and remove the No. 1 ultrasonic sensor.
89342A
3.REMOVE NO. 1 ULTRASONIC SENSOR (for Back Sensor)
Use the same procedure for the RH side and LH side.
Disconnect the connector.
Disengage the 2 claws and remove the No. 1 ultrasonic sensor.
89348R
4.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER
Perform this procedure only when replacement of the rear corner ultrasonic sensor retainer is necessary.
Use the same procedure for the RH side and LH side.
Remove the rear corner ultrasonic sensor retainer.
82183
5.REMOVE NO. 3 LUGGAGE ROOM WIRE
Perform this procedure only when replacement of the rear center ultrasonic sensor retainers is necessary.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER>DISASSEMBLY
52615
6.REMOVE REAR BUMPER ENERGY ABSORBER
Perform this procedure only when replacement of the rear center ultrasonic sensor retainers is necessary.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER>DISASSEMBLY
89348S
7.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER
Perform this procedure only when replacement of the rear center ultrasonic sensor retainers is necessary.
Use the same procedure for the RH side and LH side.
Remove the rear center ultrasonic sensor retainer.