Home › Drivetrain › UA80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION WIRE(When Not Using the Engine Support Bridge) › 2016.11–2018.09
RM3160E _52 Drivetrain _060165 UA80F AUTOMATIC TRANSMISSION / TRANSAXLE _0303752 TRANSMISSION WIRE(When Not Using the Engine Support Bridge) A

UA80F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE(When Not Using the Engine Support Bridge)  REMOVAL  


PROCEDURE

Hide 32901C 3.REMOVE OIL COOLER UNION SUB-ASSEMBLY

a.
C362357C01
2.896,1.479 3.208,1.635 0.313,0.156 10 true *1
*1 Oil Cooler Union Bolt


Remove the bolt to separate the oil cooler union sub-assembly bracket portion from the automatic transaxle case sub-assembly.


b.

Remove the oil cooler union bolt, 2 gaskets and oil cooler union sub-assembly from the automatic transaxle case sub-assembly.


Hide 35151F 4.REMOVE TRANSMISSION CASE SIDE COVER

a.
C365942

Remove the 10 bolts and transmission case side cover from the automatic transaxle case sub-assembly.


Hide 82125J 5.REMOVE TRANSMISSION WIRE

a.
C361008C01
0.135,0.208 0.448,0.365 0.313,0.156 10 false *a 0.615,3.229 0.927,3.385 0.313,0.156 10 false *b
*a Connector A
*b Connector B


Disengage the clamp to disconnect the transmission wire from the solenoid lock plate.


b.

Disconnect the 9 solenoid valve connectors.

HINT:
·

Using a screwdriver, disconnect the solenoid valve connector A using the procedure shown in the illustration.

·

Using a screwdriver, disconnect the solenoid valve connector B using the procedure shown in the illustration.




c.
C361010

Remove the bolt and temperature sensor clamp and disconnect the temperature sensor from the transmission valve body assembly.


d.
C365878

Disconnect the transmission revolution sensor (NT) connector and transmission revolution sensor (NC) connector.


e.
C361015

Remove the bolt and transmission wire from the automatic transmission case sub-assembly.