Home › Drivetrain › UA80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › VALVE BODY ASSEMBLY › from 2016.11
RM3160E _52 Drivetrain _060165 UA80F AUTOMATIC TRANSMISSION / TRANSAXLE _0304093 VALVE BODY ASSEMBLY A

UA80F AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REMOVAL  


PROCEDURE

Hide 82125J 1.REMOVE TRANSMISSION WIRE (When Using the Engine Support Bridge)

Hide 82125J 2.REMOVE TRANSMISSION WIRE (When Not Using the Engine Support Bridge)

Hide 35410 3.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C361011

Disengage the clamp to disconnect the transmission revolution sensor (NC) wire connector.


b.
C361012

Remove the 9 bolts and transmission valve body assembly from the automatic transaxle case sub-assembly.


c.
C361027C01
1.74,0.271 1.948,0.479 0.208,0.208 10 true *1 0.833,1.604 1.01,1.781 0.177,0.177 10 true *3 2.417,1.667 2.583,1.854 0.167,0.188 10 true *1 2.375,1.958 2.552,2.135 0.177,0.177 10 true *1 0.906,1.979 1.083,2.146 0.177,0.167 10 true *2
*1 Transaxle Case Gasket
*2 No. 1 Front Oil Pump Cover Gasket
*3 No. 2 Front Oil Pump Cover Gasket


Remove the 2 transaxle case gaskets from the automatic transaxle case sub-assembly.


d.

Remove the transaxle case gasket from the counter drive gear sub-assembly.


e.

Remove the No. 1 front oil pump cover gasket from the front oil pump assembly.


f.

Remove the No. 2 front oil pump cover gasket from the front oil pump assembly.