Home › Suspension › REAR SUSPENSION › REAR TRAILING ARM › from 2018.09
RM3160E _53 Suspension _019690 REAR SUSPENSION _0109434 REAR TRAILING ARM A

REAR SUSPENSION  REAR TRAILING ARM  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 48780E 1.INSTALL REAR TRAILING ARM ASSEMBLY

a.
C293822C01
0.26,1.438 0.76,1.438 true 0.219,1.677 0.438,1.677 false 0.094,1.354 0.406,1.51 0.313,0.156 10 false *a 0.042,1.583 0.354,1.771 0.313,0.188 10 false *b
*a Wooden Block
*b Jack


Support the rear No. 2 suspension arm assembly using a jack and wooden block.

CAUTION:

Do not jack up the rear No. 2 suspension arm assembly too high as the vehicle may fall.


NOTICE:

When jacking up the rear No. 2 suspension arm assembly, be sure to jack it up slowly.



b.
C293836N01
0.479,1.083 0.615,1.281 0.135,0.198 10 true A 1,1.396 1.135,1.594 0.135,0.198 10 true A 1.833,0.323 1.969,0.521 0.135,0.198 10 true B 2.969,0.604 3.104,0.802 0.135,0.198 10 true B

Install the rear trailing arm assembly to the rear axle carrier sub-assembly with the 2 bolts (A) and 2 washers.

Torque:
150 N*m (1530 kgf*cm, 111 ft.*lbf)


c.

Install the rear trailing arm assembly to the body with the 2 bolts (B).

Torque:
150 N*m (1530 kgf*cm, 111 ft.*lbf)


d.

Slowly lower the rear No. 2 suspension arm assembly.


e.
C293835

Install the No. 3 parking brake cable assembly to the rear trailing arm assembly with the 2 bolts.

Torque:
18.8 N*m (192 kgf*cm, 14 ft.*lbf)

NOTICE:

Do not twist the No. 3 parking brake cable assembly when installing it.



Hide 89546 2.INSTALL REAR SPEED SENSOR (for AWD)

a.
C293834

Install the rear speed sensor to the rear trailing arm assembly with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Do not twist the rear speed sensor when installing it.



Hide 3.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)

Hide 4.INSPECT AND ADJUST REAR WHEEL ALIGNMENT