Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
87945B
1.INSTALL OUTER MIRROR BOTTOM COVER (w/ Foot light)
Engage the 2 claws and 2 guides to install the outer mirror bottom cover.
81890D
2.INSTALL OUTER MIRROR LIGHT ASSEMBLY (w/ Foot light)
86790F
3.INSTALL SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
87909
4.INSTALL OUTER MIRROR ACTUATOR ASSEMBLY
Connect the connector.
Using a T10 "TORX" driver, install the outer mirror actuator assembly with the 3 screws.
81740
5.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY
6.INSTALL LOWER HOUSING
|
Install in this Direction |
Engage the 4 claws and 2 guides as shown in the illustration to install the lower housing.
w/ Panoramic View Monitor System:
Connect the connector.
Engage the 2 claws.
7.INSTALL VISOR HOUSING
|
Install in this Direction |
Engage the 2 claws and guide as shown in the illustration to install the visor housing.
Using a T10 "TORX" driver, install the visor housing with the 4 screws.
87945
8.INSTALL OUTER MIRROR COVER
87961
9.INSTALL OUTER MIRROR