Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
87961
1.REMOVE OUTER MIRROR
87945
2.REMOVE OUTER MIRROR COVER
| *a | Protective Tape |
|
Insert Screwdriver Here |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw as shown in the illustration.
|
Place Hand Here |
|
Pull in this Direction |
Pull the outer mirror cover as shown in the illustration to disengage the claw.
As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration.
If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape.
|
Place Hand Here |
|
Pull in this Direction |
Pull the outer mirror cover as shown in the illustration to disengage the 5 claws and remove the outer mirror cover.
As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration.
If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape.