77740
1.INSTALL CANISTER (CHARCOAL CANISTER ASSEMBLY)
Engage the claw to install the canister (charcoal canister assembly) to the vehicle body as shown in the illustration.
Install the 2 bolts.
Connect the No. 7 fuel tank breather tube to the canister (charcoal canister assembly) and slide the clip to secure it.
Connect the fuel emission hose to the canister (charcoal canister assembly) and slide the clip to secure it.
| *a | Retainer |
|
Push in |
Push the fuel tank evaporation vent tube sub-assembly onto the canister (charcoal canister assembly) and push in the retainer to engage the lock claws.
Check that there are no scratches or foreign matter around the connecting parts of the tube connector and pipe (canister (charcoal canister assembly)) before performing this work.
After connecting the fuel tank evaporation vent tube sub-assembly, check that the fuel tank evaporation vent tube sub-assembly is securely connected by pulling on the tube connector.
58166A
2.INSTALL FRONT FLOOR COVER LH