Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
67848E
1.REMOVE BACK DOOR SERVICE HOLE COVER LH
67847
2.REMOVE BACK DOOR SERVICE HOLE COVER RH
Use the same procedure as for the LH side.
64780A
3.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
84280D
4.REMOVE POWER BACK DOOR SENSOR ASSEMBLY (w/ Power Back Door)
81590A
5.REMOVE REAR LIGHT ASSEMBLY
If the rear light assembly has been removed, replace the rear light packing and rear light gasket with a new one.
Disconnect the connector.
Disengage the clamp.
Remove the 4 nuts.
Disengage the guide to remove the rear light assembly.