CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
| *a | This connector is not used by the windshield deicer system. Refer to Air Conditioning System. | - | - |
Disconnect the H62 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Measure the values on the wire harness side with the connector disconnected.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H62-6 (IG+) - H62-17 (GND) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| H62-6 (IG+) - H62-17 (GND) | Power source (IG) | Ignition switch off | Below 1 V |
| H62-5 (B) - H62-17 (GND) | Auxiliary battery power supply | Ignition switch off*1
Always*2 |
11 to 14 V |
| H62-17 (GND) - Body ground | Ground | Always | Below 1 Ω |
*1: for HV Model
*2: for Gasoline Model
Reconnect the H62 air conditioning amplifier assembly connector.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H62-22 (FDEF) - H62-17 (GND) | Wiper Deicer signal | Ignition switch ON, Front wiper deicer switch off | 11 to 14 V |
| H62-22 (FDEF) - H62-17 (GND) | Wiper Deicer signal | Ignition switch ON, Front wiper deicer switch on | Below 2.2 V |
| H62-7 (LIN1) - H62-17 (GND) | LIN communication line | Ignition switch ON | Pulse generation |
FRONT WIPER DEICER SWITCH (AIR CONDITIONING CONTROL ASSEMBLY)
Click hereVehicle Exterior>WINDOW / GLASS>WINDOW DEFOGGER SYSTEM>TERMINALS OF ECU