Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
76832A
1.REMOVE BACK DOOR FINISH PANEL COVER
2.REMOVE LICENSE PLATE LIGHT LENS
| *a | Protective Tape |
| *b | Insert into the hole |
| *c | License Plate Light Lens Hole |
|
Remove in this Direction |
Insert a screwdriver wrapped with protective tape into the license plate light lens hole, tilt it as shown in the illustration and disengage the 2 claws to remove the license plate light lens.
81270B
3.REMOVE LICENSE PLATE LIGHT BULB
Remove the license plate light bulb from the license plate light housing.