Headup display is not displayed
(Steering pad switch is normal)
|
Wire harness or connector
|
-
|
Read the Data List
(Display Change Switch)
|
|
| Meter mirror sub-assembly
|
|
| Combination meter assembly
|
|
Brightness of the headup display does not change
(Steering pad switch is normal)
|
Read the Data List
(Brightness Up Switch, Brightness Down Switch)
|
|
Perform Active Test
(Display Brightness)
|
|
| Meter mirror sub-assembly
|
|
| Combination meter assembly
|
|
Display position of the headup display does not change
(Steering pad switch is normal)
|
Read the Data List
(Projection Position Up Switch, Projection Position Down Switch)
|
|
Perform Active Test
(Display Position)
|
|
| Meter mirror sub-assembly
|
|
| Combination meter assembly
|
|
| Headup display is not displayed in the correct position or is difficult to see
|
Headup display position initialization
|
|
| Check customize parameters
|
|
Read the Data List
(Display Angle)
|
|
Perform Active Test
(Display Position)
|
|
| Meter mirror sub-assembly
|
|
| Combination meter assembly
|
|
Individual segments or entire display is not displayed
(Other systems are normal)
|
Perform Active Test
(Color Test Screen (Black), Color Test Screen (White), Color Test Screen (Red), Color Test Screen (Green), Color Test Screen (Blue), Color Test Screen (Color Bars))
|
|
| Meter mirror sub-assembly
|
|
| Combination meter assembly
|
|
Illumination is always dark or does not dim at night
(Lighting system (EXT) is normal)
|
Meter mirror sub-assembly
|
|