89111
1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)
|
Install in this Direction |
Engage the 2 claws to install the central gateway ECU (network gateway ECU) as shown in the illustration.
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
2.INSTALL ECU INTEGRATION BOX RH
Install the ECU integration box RH with the bolt and nut.
Engage the 2 clamps.
Connect each connector.
55303B
3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
55607
4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55435A
5.INSTALL INSTRUMENT PANEL FINISH END PANEL RH
62311B
6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
62111A
7.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
8.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION