1.INSTALL ROOF HEADLINING ASSEMBLY
|
Install in this Direction |
Put the roof headlining assembly into the vehicle through the back door as shown in the illustration.
Do not damage the roof headlining assembly or vehicle interior.
Connect the 2 connectors.
for Normal Roof:
Install the roof headlining assembly with the 6 clips.
for Moon Roof:
Engage the 11 fasteners and install the roof headlining assembly with the 4 clips.
Connect the connector.
for Panoramic Moon Roof:
Engage the 20 fasteners and install the roof headlining assembly with the 2 clips.
Connect the connector.
for Rear Pillar LH Side:
Connect the washer hose assembly.
Connect the connector.
for Rear Pillar LH Side with Digital Audio Broadcasting Antenna:
| *a | Clamp |
| *b | Guide |
Engage the 3 clamps.
Engage the guide.
Install the bolt.
Connect the connector.
for Front Pillar LH Side:
Connect the washer hose assembly.
Connect the 3 connectors.
Engage the 4 clamps.
for Front Pillar RH Side:
Engage the guide.
Install the bolt.
Connect the 3 connectors.
Engage the 3 clamps.
for Windshield Glass Side:
Connect each connector.
74348
2.INSTALL VISOR HOLDER
Use the same procedure for the LH side and RH side.
|
Install in this Direction |
Engage the 2 claws to install the base of each visor holder as shown in the illustration.
|
Install in this Direction |
Install the visor holder as shown in the illustration.
74320
3.INSTALL VISOR ASSEMBLY LH
| *1 | Visor Holder |
Connect the visor assembly LH to the visor holder.
Using a T25 "TORX" socket wrench, install the visor assembly LH with the 2 screws.
74325
4.INSTALL VISOR BRACKET COVER LH (w/ Cover)
Engage the 4 claws to install the visor bracket cover LH.
74310
5.INSTALL VISOR ASSEMBLY RH
Use the same procedure as for the LH side.
74325
6.INSTALL VISOR BRACKET COVER RH (w/ Cover)
Use the same procedure as for the LH side.
74610A
7.INSTALL ASSIST GRIP SUB-ASSEMBLY
Use the same procedure for all assist grip sub-assemblies.
| *a | Assist Grip |
Install the 2 clips to the assist grip.
Temporarily install the 2 assist grip covers to the assist grip as shown in the illustration.
|
Install in this Direction |
Engage the 2 clips to install the assist grip assembly as shown in the illustration.
Engage the 4 claws to install the assist grip cover LH and assist grip cover RH.
Make sure that the clips are engaged securely.
74630E
8.INSTALL REAR ASSIST GRIP ASSEMBLY LH
Use the same procedure as for the assist grip sub-assembly.
74620C
9.INSTALL REAR ASSIST GRIP ASSEMBLY LH
Use the same procedure as for the assist grip sub-assembly.
87217D
10.INSTALL REAR NO. 1 SIDE AIR DUCT
88892Q
11.INSTALL COOLER PLATE
86680A
12.INSTALL TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)
86295
13.INSTALL TELEVISION BASE (w/ Rear Seat Entertainment System)
81240
14.INSTALL NO. 1 ROOM LIGHT ASSEMBLY
81360T
15.INSTALL SPOT LIGHT ASSEMBLY (except Panoramic Moon Roof)
81260A
16.INSTALL MAP LIGHT ASSEMBLY
86466D
17.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
86466E
18.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
89943
19.INSTALL RAIN SENSOR COVER (w/ Rain Sensor)
62480A
20.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
| *1 | Roof Side Garnish Clip |
| *2 | Inner Roof Side Garnish Assembly LH |
Install 2 new roof side garnish clips to the inner roof side garnish assembly LH.
Make sure that the roof side garnish clip is engaged correctly.
Pass the anchor of the rear No. 2 seat outer belt assembly LH through the inner roof side garnish assembly LH.
|
Install in this Direction |
Engage the 6 clips as shown in the illustration.
|
Install in this Direction |
Engage the 2 clips to install the inner roof side garnish assembly LH as shown in the illustration.
62639A
21.INSTALL QUARTER PILLAR GARNISH LH
Pass the anchor of the rear seat outer belt assembly LH through the quarter pillar garnish LH.
Engage the guide, 2 clips and claw to install the quarter pillar garnish LH.
64740C
22.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
Engage the 5 guides, 10 clips and claw.
Install the deck trim side panel assembly LH with the 3 bolts.
66311
23.INSTALL ROPE HOOK (for LH Side)
|
Install in this Direction |
Install the 2 rope hooks with the 2 bolts.
Engage the 4 claws as shown in the illustration.
64725F
24.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)
|
Install in this Direction |
Turn the No. 1 luggage compartment trim hook as shown in the illustration to install it.
64974
25.INSTALL DECK TRIM POCKET COVER (for LH Side)
Engage the 2 claws to install the deck trim pocket cover.
73570
26.CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
64715E
27.INSTALL NO. 2 DECK SIDE TRIM COVER
|
Install in this Direction |
Engage the 4 claws and clip to install the No. 2 deck side trim cover as shown in the illustration.
73370E
28.CONNECT REAR SEAT OUTER BELT ASSEMBLY LH
64713F
29.INSTALL FRONT DECK SIDE TRIM COVER LH
Engage the 3 guides and 5 clips.
Install the front deck side trim cover LH with the clip.
62470A
30.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH
Use the same procedure as for the LH side.
62638A
31.INSTALL QUARTER PILLAR GARNISH RH
Use the same procedure as for the LH side.
64730B
32.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
Engage the 5 guides, 10 clips and claw.
Install the deck trim side panel assembly RH with the 3 bolts.
66311
33.INSTALL ROPE HOOK (for RH Side)
Use the same procedure as for the LH side.
64725F
34.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)
Use the same procedure as for the LH side.
64974
35.INSTALL DECK TRIM POCKET COVER (for RH Side)
Use the same procedure as for the LH side.
88625T
36.INSTALL COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR
73560
37.CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
64714H
38.INSTALL NO. 1 DECK SIDE TRIM COVER
Use the same procedure as for the No. 2 deck side trim cover.
73360D
39.CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
64712F
40.INSTALL FRONT DECK SIDE TRIM COVER RH
Engage the 2 guides and 5 clips.
Install the front deck side trim cover RH with the clip.
62420A
41.INSTALL CENTER PILLAR GARNISH ASSEMBLY LH
Pass the anchor of the front seat outer belt assembly LH through the center pillar garnish assembly LH.
|
Install in this Direction |
Engage the 2 guides and clip as shown in the illustration.
Engage the guide.
Install the center pillar garnish assembly LH with the 2 clips.
62414A
42.INSTALL LOWER CENTER PILLAR GARNISH LH
|
Install in this Direction |
Engage the 2 clips and 4 claws to install the lower center pillar garnish LH as shown in the illustration.
73220
43.CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
73233
44.INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)
62332C
45.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
67918A
46.INSTALL REAR DOOR SCUFF PLATE LH
Engage the guide, 3 clips and 5 claws to install the rear door scuff plate LH.
72138M
47.INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH
Engage the 2 guides and 6 clips to install the rear outer seat track bracket cover LH.
62212B
48.INSTALL FRONT PILLAR GARNISH ASSEMBLY LH
Remove the protective cover.
| *1 | Front Pillar Garnish Clip |
| *2 | Front Pillar Garnish LH |
Install 2 new front pillar garnish clips to the front pillar garnish assembly LH.
Make sure that the front pillar garnish clip is engaged correctly.
w/ Front No. 3 Speaker:
Connect the connector.
|
Install in this Direction |
Push the front pillar garnish assembly LH as shown in the illustration to engage the 2 guides.
|
Install in this Direction |
Engage the 2 front pillar garnish clips to install the front pillar garnish assembly LH as shown in the illustration.
Make sure that the curtain shield airbag assembly LH is not pinched.
62312B
49.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62112A
50.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
Install in this Direction |
Engage the claw and clip as shown in the illustration.
Install the cowl side trim sub-assembly LH with the clip.
67914
51.INSTALL FRONT DOOR SCUFF PLATE LH
Engage the 3 guides and 9 claws to install the front door scuff plate LH.
62411
52.INSTALL CENTER PILLAR GARNISH ASSEMBLY RH
Use the same procedure as for the LH side.
62413A
53.INSTALL LOWER CENTER PILLAR GARNISH RH
Use the same procedure as for the LH side.
73210
54.CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
73233
55.INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)
Use the same procedure as for the LH side.
62331C
56.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
67917A
57.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
72137S
58.INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH
Use the same procedure as for the LH side.
62211U
59.INSTALL FRONT PILLAR GARNISH ASSEMBLY RH
Use the same procedure as for the LH side.
62311B
60.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
62111A
61.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
67913
62.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
63.INSTALL REAR NO. 2 SEAT ASSEMBLY
58387B
64.INSTALL REAR FLOOR FINISH PLATE
|
Install in this Direction |
Engage the 4 clips, 2 guides and 4 claws to install the rear floor finish plate as shown in the illustration.
64742C
65.INSTALL DECK SIDE TRIM BOX LH (w/o Woofer)
Engage the 4 claws to install the deck side trim box LH.
64993
66.INSTALL REAR DECK FLOOR BOX
Engage the 2 clips and 7 claws.
Install the rear deck floor box with the nut.
Install the 7 clips.
58441L
67.INSTALL BATTERY SERVICE HOLE COVER
Engage the 2 guides and 6 claws to install the battery service hole cover.
64910J
68.INSTALL TONNEAU COVER ASSEMBLY
Install the tonneau cover assembly.
58409A
69.INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/o Woofer)
Install the No. 3 deck board sub-assembly.
58410B
70.INSTALL DECK BOARD ASSEMBLY
Install the deck board assembly.