Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
RM37A0E _58 Vehicle Interior _086894 SEAT _0417793 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type LH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY LH

a.

Place the rear No. 1 seat assembly LH in the cabin.

NOTICE:

Be careful not to damage the rear No. 1 seat assembly LH, vehicle body or vehicle interior.



b.

Engage the 2 pins to temporarily install the rear No. 1 seat assembly LH.


c.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly LH to the rearmost position.


d.

Temporarily install the 2 bolts on the front side of the rear No. 1 seat assembly LH.


e.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly LH to the foremost position.


f.

Temporarily install the 3 bolts on the rear side of the rear No. 1 seat assembly LH.


g.

Connect the connector.


h.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly LH to the rearmost position.


i.
B563981N01
0.854,1.719 1.01,1.917 0.156,0.198 10 true 1 2.073,1.906 2.229,2.104 0.156,0.198 10 true 2

Tighten the 2 bolts on the front side of the rear No. 1 seat assembly LH.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


j.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly LH to the foremost position.


k.
B563982N01
0.469,0.594 0.635,0.771 0.167,0.177 10 true 1 1.219,0.583 1.385,0.76 0.167,0.177 10 true 2 2.458,0.698 2.625,0.875 0.167,0.177 10 true 3

Tighten the 3 bolts on the rear side of the rear No. 1 seat assembly LH to install it.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


Hide 67918A 2.INSTALL REAR DOOR SCUFF PLATE LH

Hide 72138M 3.INSTALL REAR OUTER SEAT TRACK BRACKET COVER LH

a.

Engage the 2 guides and 6 clips to install the rear outer seat track bracket cover LH.


Hide 72158B 4.INSTALL REAR INNER SEAT TRACK BRACKET COVER LH

a.

Engage the 2 claws, 2 clips and 2 guides to install the rear inner seat track bracket cover LH.


Hide 72124C 5.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH

a.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly LH to the rearmost position.


b.
B563979C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw to install the front outer seat track bracket cover LH as shown in the illustration.


c.

Install the screw.


Hide 72128G 6.INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH (for Gasoline Model)

HINT:

Use the same procedure as for the front outer seat track bracket cover LH.


Hide 72128G 7.INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH (for HV Model)

a.
B571131C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw to install the front inner seat track bracket cover LH as shown in the illustration.


b.

Install the 3 screws.


Hide 71940A 8.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the rear seat headrest assembly.


Hide 9.CHECK SEAT HEATER (w/ Seat Heater System)