Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
RM37A0E _58 Vehicle Interior _086894 SEAT _0417794 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY RH

a.

Place the rear No. 1 seat assembly RH in the cabin.

NOTICE:

Be careful not to damage the rear No. 1 seat assembly RH, vehicle body or vehicle interior.



b.

Engage the 2 pins to temporarily install the rear No. 1 seat assembly RH.


c.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly RH to the rearmost position.


d.

Temporarily install the 2 bolts on the front side of the rear No. 1 seat assembly RH.


e.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly RH to the foremost position.


f.

Temporarily install the 3 bolts on the rear side of the rear No. 1 seat assembly RH.


g.

Connect the connector.


h.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly RH to the rearmost position.


i.
B566419N01
2.229,1.281 2.385,1.479 0.156,0.198 10 true 1 1.198,1.792 1.354,1.99 0.156,0.198 10 true 2

Tighten the 2 bolts on the front side of the rear No. 1 seat assembly RH.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


j.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly RH to the foremost position.


k.
B566420N01
1.302,0.438 1.458,0.635 0.156,0.198 10 true 1 0.74,0.115 0.896,0.313 0.156,0.198 10 true 2 0.552,0.813 0.708,1.01 0.156,0.198 10 true 3

Tighten the 3 bolts on the rear side of the rear No. 1 seat assembly RH to install it.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


Hide 67917A 2.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 72137S 3.INSTALL REAR OUTER SEAT TRACK BRACKET COVER RH

a.

Engage the 2 guides and 6 clips to install the rear outer seat track bracket cover RH.


Hide 72157D 4.INSTALL REAR INNER SEAT TRACK BRACKET COVER RH

a.

Engage the 2 clips and 2 claws to install the rear inner seat track bracket cover RH.


Hide 72123C 5.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER RH

a.

Operate the seat track adjusting handle and move the rear No. 1 seat assembly RH to the rearmost position.


b.
B566418C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw as shown in the illustration to install the front outer seat track bracket cover RH.


c.

Install the screw.


Hide 72127G 6.INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH (for Gasoline Model)

HINT:

Use the same procedure as for the front outer seat track bracket cover RH.


Hide 72127G 7.INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH (for HV Model)

a.
B571133C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw as shown in the illustration to install the front inner seat track bracket cover RH.


b.

Install the 3 screws.


Hide 71960B 8.INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

a.

Install the rear seat center headrest assembly.


Hide 71940A 9.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the rear seat headrest assembly.


Hide 10.CHECK SEAT HEATER (w/ Seat Heater System)