Wear protective gloves. Sharp areas on the parts may injure your hands.
58410B
1.REMOVE DECK BOARD ASSEMBLY
58409A
2.REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY (w/o Woofer)
64910J
3.REMOVE TONNEAU COVER ASSEMBLY
58441L
4.REMOVE BATTERY SERVICE HOLE COVER
64993
5.REMOVE REAR DECK FLOOR BOX
64742C
6.REMOVE DECK SIDE TRIM BOX LH (w/o Woofer)
73590
7.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
73580
8.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY RH
9.REMOVE REAR SEATBACK ASSEMBLY RH
Remove the 4 bolts.
Disengage the guide and remove the rear seatback assembly RH.
10.REMOVE REAR SEATBACK ASSEMBLY LH
Remove the 4 bolts.
Disengage the guide and remove the rear seatback assembly LH.
11.REMOVE REAR SEAT CUSHION ASSEMBLY
|
Place Hand Here |
|
Remove in this Direction |
Lift the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks to remove the rear seat cushion assembly.
Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
Be careful not to damage the vehicle body.
| Area | Measurement |
|---|---|
| A | 146 mm (5.75 in.) |
72693
12.REMOVE REAR SEAT CUSHION LOCK HOOK
|
Remove in this Direction |
Disengage the 2 claws to remove the rear seat cushion lock hook as shown in the illustration.
Use the same procedure for the RH side and LH side.