Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY
RM37A0E _58 Vehicle Interior _086894 SEAT _0417795 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 72693 1.INSTALL REAR SEAT CUSHION LOCK HOOK

a.
B567659C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws as shown in the illustration to install a new rear seat cushion lock hook.

HINT:

Use the same procedure for the RH side and LH side.



Hide 2.INSTALL REAR SEAT CUSHION ASSEMBLY

a.

Place the rear seat cushion assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B571143C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 rear seat cushion frame hooks as shown in the illustration to install the rear seat cushion assembly.

NOTICE:

Confirm that the rear seat cushion assembly is securely installed.



Hide 3.INSTALL REAR SEATBACK ASSEMBLY LH

a.

Place the rear seatback assembly LH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B564513N01
2.156,1.01 2.313,1.208 0.156,0.198 10 true 1 0.771,1.125 0.927,1.323 0.156,0.198 10 true 2 0.813,1.885 0.969,2.083 0.156,0.198 10 true 3 2.698,1.708 2.844,1.885 0.146,0.177 10 true 4

Engage the guide.


c.

Temporarily install the rear seatback assembly LH with the 4 bolts.


d.

Tighten the 4 bolts on the rear seatback assembly LH.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


Hide 4.INSTALL REAR SEATBACK ASSEMBLY RH

a.

Place the rear seatback assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B571141N01
1.354,0.948 1.51,1.146 0.156,0.198 10 true 1 2.448,1.344 2.604,1.542 0.156,0.198 10 true 2 2.646,1.938 2.802,2.135 0.156,0.198 10 true 3 1.083,1.688 1.229,1.865 0.146,0.177 10 true 4

Engage the guide.


c.

Temporarily install the rear seatback assembly RH with the 4 bolts.


d.

Tighten the 4 bolts on the rear seatback assembly RH.

HINT:

Tighten the bolts in the order shown in the illustration.


Torque:
36.7 N*m (374 kgf*cm, 27 ft.*lbf)


Hide 73580 5.INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH

Hide 73590 6.INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

Hide 64742C 7.INSTALL DECK SIDE TRIM BOX LH (w/o Woofer)

Hide 64993 8.INSTALL REAR DECK FLOOR BOX

Hide 58441L 9.INSTALL BATTERY SERVICE HOLE COVER

Hide 64910J 10.INSTALL TONNEAU COVER ASSEMBLY

Hide 58409A 11.INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/o Woofer)

Hide 58410B 12.INSTALL DECK BOARD ASSEMBLY