Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE ROOF HEADLINING ASSEMBLY
81390C
2.REMOVE SPOT LIGHT ASSEMBLY
Disengage the 4 claws to remove the map light sub-assembly.
Disengage the 7 claws and guide to remove the spot light assembly.
81361E
3.REMOVE NO. 2 SPOT LIGHT LENS
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and 2 guides to remove the No. 2 spot light lens.
81360U
4.REMOVE SPOT LIGHT BULB
Remove the spot light bulb from the map light sub-assembly.
81269
5.REMOVE MAP LIGHT SWITCH
|
Remove in this Direction |
Disengage the 2 guides to remove the map light switch as shown in the illustration.