The No. 2 skid control ECU (brake actuator assembly) sends a stop light operation request signal to the stop light relay (stop light switch assembly). If the No. 2 skid control ECU (brake actuator assembly) detects a malfunction in the stop light relay (stop light switch assembly) circuit, the forward recognition camera stores this DTC.
The skid control ECU (brake actuator assembly) sends a stop light operation request signal to the stop light relay (stop light switch assembly). If the skid control ECU (brake actuator assembly) detects a malfunction in the stop light relay (stop light switch assembly) circuit, the forward recognition camera stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C142571 | Stop Light Relay Actuator Stuck | for HV Model
3 seconds or more after the ignition switch is turned to ON, the forward recognition camera receives a stop light relay circuit malfunction signal from the No. 2 skid control ECU (brake actuator assembly) for approximately 1 second or more. for Gasoline Model
3 seconds or more after the ignition switch is turned to ON, the forward recognition camera receives a stop light relay circuit malfunction signal from the skid control ECU (brake actuator assembly) for approximately 1 second or more. |
Electronically controlled brake system |
If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.
for HV Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING
for Gasoline Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT