*: Use the GTS.
| Proceed to |
|---|
| NEXT |
NEXT
Interview the customer and confirm the problem.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT
Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>DTC CHECK / CLEAR
for Freeze Frame Data: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>FREEZE FRAME DATA
Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>DTC CHECK / CLEAR
for Freeze Frame Data: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>FREEZE FRAME DATA
Reconfirm the DTCs.
Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
for DTC Check / Clear: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>DTC CHECK / CLEAR
for Freeze Frame Data: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>FREEZE FRAME DATA
When CAN communication system DTCs are output, repair the CAN communication system first.
If DTCs related to momentary interruptions are output, perform troubleshooting for those DTCs first.
If the GTS cannot communicate with the skid control ECU (brake actuator assembly), inspect the CAN communication system.
If there is no response from the skid control ECU (brake actuator assembly), skid control ECU (brake actuator assembly), inspect the supply power circuit.
Check the Vehicle Control History.
| Tester Display |
|---|
| Vehicle Control History (RoB) |
| Result | Proceed to |
|---|---|
| DTCs are not output. (Problem symptom occurs.) | A |
| DTCs are output. | B |
| DTCs are not output. (Problem symptom does not occur.) | C |
| DTCs are not output. (vehicle control history occurs.) | D |
A
B
C
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
D
After performing troubleshooting and repair regarding vehicle control history, clear the vehicle control history.