Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418319 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  P160700  Cruise Control Input Processor  


DESCRIPTION

When the hybrid vehicle control ECU detects that it is not functioning normally, DTC P160700 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P160700 Cruise Control Input Processor When the ignition switch is ON and control of vehicle speed by the dynamic radar cruise control system is prohibited by the sub-CPU, the dynamic radar cruise control system operates for 0.3 seconds or more. Hybrid vehicle control ECU Cruise Control

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.


HINT:

Read the freeze frame data using the GTS. When a malfunction is detected, various engine control parameters are stored as freeze frame data and can be useful for troubleshooting.


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Powertrain > Radar Cruise1 > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Radar Cruise1 > Trouble Codes
50001 399

Result:
Result Proceed to
DTC P160700 is not output A
DTC P160700 is output B



A

B