Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418319 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  P163181  Communication Error from ECM to VSC Invalid Serial Data Received  


DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) sends signals such as brake request signals to the hybrid vehicle control ECU. When the hybrid vehicle control ECU detects logic error signals sent from the No. 2 skid control ECU (brake actuator assembly) for a certain period of time, DTC P163181 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P163181 Communication Error from ECM to VSC Invalid Serial Data Received When the ignition switch is ON and the dynamic radar cruise control system is operating, the hybrid vehicle control ECU detects logic error signals sent from the No. 2 skid control ECU (brake actuator assembly) for approximately 1 second or more.
·

Electronically controlled brake system

·

Hybrid vehicle control ECU


Cruise Control

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.


PROCEDURE

1.CHECK FOR DTCs
a.

Check for electronically controlled brake system DTCs.

Chassis > Brake/EPB > Trouble Codes
50001 435
Chassis > Brake Booster > Trouble Codes
50001 466

Result:
Result Proceed to
Electronically controlled brake system DTCs are not output A
Electronically controlled brake system DTCs are output B



A

2.CHECK FOR DTC

B

2.CHECK FOR DTC
a.

Clear the DTCs.

Powertrain > Radar Cruise1 > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Radar Cruise1 > Trouble Codes
50001 399

Result:
Result Proceed to
DTC P163181 is not output A
DTC P163181 is output B



A

B