Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418320 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) J

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  Cruise Main Indicator Light Circuit  


DESCRIPTION

When the dynamic radar cruise control system is turned on using the cruise control main switch, the cruise control indicator (vehicle-to-vehicle distance control mode) illuminates. The ECM uses this and other indicators to indicate the status (presence or absence of a preceding vehicle, vehicle-to-vehicle distance, malfunction of system or related systems) of the dynamic radar cruise control system.

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the ECM, refer to Service Bulletin.

·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.



PROCEDURE

1.PERFORM ACTIVE TEST USING GTS
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Multi Display All (White) Multi-information display (White display) OFF or ON -
Body Electrical > Combination Meter > Active Test
Tester Display
Multi Display All (White)
50004 409 20

Result:
Result Proceed to
The multi-information display in the combination meter assembly turns on according to the operation of the Active Test A
The multi-information display in the combination meter assembly does not turn on according to the operation of the Active Test B



A

2.READ VALUE USING GTS

B

2.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Powertrain > Radar Cruise1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Cruise Indicator Cruise control indicator status OFF or ON OFF: Cruise control indicator turns off
ON: Cruise control indicator illuminates
-
Powertrain > Radar Cruise1 > Data List
Tester Display
Cruise Indicator
50003 374 17

Result:
Result Proceed to
The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch A
The cruise control indicator does not illuminate but the Data List items change according to the operation of the cruise control main switch B
The cruise control indicator does not illuminate and the Data List items do not change according to the operation of the cruise control main switch C



A

B

REPLACE COMBINATION METER ASSEMBLY

C