Home › Engine / Hybrid System › A25A-FXS, A25B-FXS (ENGINE CONTROL) › ECM › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086905 A25A-FXS ENGINE CONTROL _0418421 ECM A

A25A-FXS ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89668 1.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket to the ECM with the 2 screws.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 89667E 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket to the ECM with the 2 screws.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


Hide 89661 3.INSTALL ECM

a.

Install the ECM with the bolt and 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

If the ECM has been struck or dropped, replace it.



b.
A454931

Engage the clamp.


c.

Install the engine wire to the No. 1 ECM bracket with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

Connect the 2 ECM connectors and rotate the 2 levers to lock them.

NOTICE:
·

When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.

·

Be sure to securely connect the ECM connectors.




Hide 4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 58441L 5.INSTALL BATTERY SERVICE HOLE COVER