Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418438 VACUUM SWITCHING VALVE(for Engine Mounting) A

2GR-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  INSTALLATION  


PROCEDURE

Hide 17650E 1.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.

Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


b.

Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).


c.

Engage the vacuum hose clamp.


d.

Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.


Hide 17750A 2.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 53295E 3.INSTALL COOL AIR INTAKE DUCT SEAL